12,508 research outputs found

    Research Error. How I Came to be Where I am.

    Get PDF
    The text below reproduces, more or less, a talk I gave during the college’s Research Week in Spring 2003. Although the talk was scripted for the most part, there were a few improvised ‘passages’ – the major one occasioned by a latecomer’s tussle with the door, as I recall. Literally, ‘error’ means wandering and I used the word not just to create a link with William Carlos Williams’ unruly and roaming improvisation, Rome but also to signal my own sense of dissatisfaction, which was the goad for the talk in the first place. Dissatisfaction with the critical ‘voice’ in which I seemed to find myself ensnared after seventeen years purposeful writing and thinking in academia. A voice so clinical – or so it seemed to me – so anodyne and remote from the texts it was speaking about. The nature of these texts is very much to the point, since in working with ‘improvisations’ I was engaging with texts whose impetus and modus operandi fly in the face of many of the traditional pieties of academic discourse. Improvisations – those of Williams, at least – are not considered or consistent. They are often not finished, let alone polished. Subjectivity courses through them with an urgency that bursts syntax like a flash flood will snap a drain. So, should I rein back, refrain from engagements this kind of text altogether? As far as I know, only one other scholar has written in detail about Rome, although a published facsimile edition has been available now for over thirty years. What follows are my first real efforts to address the improvisations in a way that does not routinely betray their poetics but also traverses the communal space that is critical inquiry

    Singularities of spacelike constant mean curvature surfaces in Lorentz-Minkowski space

    Get PDF
    We study singularities of spacelike, constant (non-zero) mean curvature (CMC) surfaces in the Lorentz-Minkowski 3-space L3L^3. We show how to solve the singular Bj\"orling problem for such surfaces, which is stated as follows: given a real analytic null-curve f0(x)f_0(x), and a real analytic null vector field v(x)v(x) parallel to the tangent field of f0f_0, find a conformally parameterized (generalized) CMC HH surface in L3L^3 which contains this curve as a singular set and such that the partial derivatives fxf_x and fyf_y are given by \frac{\dd f_0}{\dd x} and vv along the curve. Within the class of generalized surfaces considered, the solution is unique and we give a formula for the generalized Weierstrass data for this surface. This gives a framework for studying the singularities of non-maximal CMC surfaces in L3L^3. We use this to find the Bj\"orling data -- and holomorphic potentials -- which characterize cuspidal edge, swallowtail and cross cap singularities.Comment: 28 pages, 2 figures. Version 2: Figure 2 adde

    UK Competition Policy and Shareholder Value: The Impact of Merger Inquiries

    Get PDF
    Some previous studies have suggested that competition re´gimes can destroy shareholder value. This study examines data on 50 mergers in the UK between 1989 and 2002. The study confirms the finding from earlier studies of greater gains to shareholders in target than bidding companies, but does not find evidence supporting overall loss of shareholder value to target company shareholders when a merger is prohibited. It finds evidence that when the regulatory re´gime is stable and well understood the capital market behaves efficiently in response to new information. However, for a subgroup of the mergers involving companies with a new regulatory re´gime, where the industry and the stock market had little or no experience with respect to mergers, the capital market operated less efficiently

    Experimental measurement and theoretical modeling of microwave scattering and the structure of the sea surface influencing radar observations from space

    Get PDF
    The electromagnetic bias is an error present in radar altimetry of the ocean due to the non-uniform reflection from wave troughs and crests. A study of the electromagnetic bias became necessary to permit error reduction in mean sea level measurements of satellite radar altimeters. Satellite radar altimeters have been used to find the upper and lower bounds for the electromagnetic bias. This report will present a theory using physical optics scattering and an empirical model of the short wave modulation to predict the electromagnetic bias. The predicted electromagnetic bias will be compared to measurements at C and Ku bands

    Technologies for aerobraking

    Get PDF
    Aerobraking is one of the largest contributors to making both lunar and Mars missions affordable. The use of aerobraking/aeroassist over all propulsive approaches saves as much as 60 percent of the initial mass required in low earth orbit (LEO); thus, the number and size of earth to orbit launch vehicles is reduced. Lunar transfer vehicles (LTV), which will be used to transport personnel and materials from LEO to lunar outpost, will aerobrake into earth's atmosphere at approximately 11 km/sec on return from the lunar surface. Current plans for both manned and robotic missions to Mars use aerocapture during arrival at Mars and at return to Earth. At Mars, the entry velocities will range from about 6 to 9.5 km/sec, and at Earth the return velocity will be about 12.5 to 14 km/sec. These entry velocities depend on trajectories, flight dates, and mission scenarios and bound the range of velocities required for the current studies. In order to successfully design aerobrakes to withstand the aerodynamic forces and heating associated with these entry velocities, as well as to make them efficient, several critical technologies must be developed. These are vehicle concepts and configurations, aerothermodynamics, thermal protection system materials, and guidance, navigation, and control systems. The status of each of these technologies are described, and what must be accomplished in each area to meet the requirements of the Space Exploration Initiative is outlined

    Contamination of optical surfaces

    Get PDF
    The effect of molecular contamination on Space Station optical surfaces is examined. In particular, contamination of solar voltaic power sources and optical solar reflectors for thermal control or solar dynamic power generation is addressed. The published Space Station requirements for molecular contamination accretion and for the monitoring of such accretion is discussed in the context of the historical performance of space systems. Specific reference is made to the results from the Spacecraft Charging at High Altitudes (SCATHA) ML12 experiment

    A Model for Optimal Human Navigation with Stochastic Effects

    Full text link
    We present a method for optimal path planning of human walking paths in mountainous terrain, using a control theoretic formulation and a Hamilton-Jacobi-Bellman equation. Previous models for human navigation were entirely deterministic, assuming perfect knowledge of the ambient elevation data and human walking velocity as a function of local slope of the terrain. Our model includes a stochastic component which can account for uncertainty in the problem, and thus includes a Hamilton-Jacobi-Bellman equation with viscosity. We discuss the model in the presence and absence of stochastic effects, and suggest numerical methods for simulating the model. We discuss two different notions of an optimal path when there is uncertainty in the problem. Finally, we compare the optimal paths suggested by the model at different levels of uncertainty, and observe that as the size of the uncertainty tends to zero (and thus the viscosity in the equation tends to zero), the optimal path tends toward the deterministic optimal path

    Global Monte Carlo for fermions using ordered statistics

    Full text link
    In this talk I discuss a new possibility for stochastic representation of the fe rmion determinant. The method can be used for global Monte Carlo fermion algorit hms and is tested in the case of the Schwinger model.Comment: 3 pages, Lattice2003 (Machines I

    Synthesis and \u3csup\u3e1\u3c/sup\u3eH-NMR characterization of amphiphilic acrylate block copolymers to investigate the effect of chain rigidity on micelle formation in solution

    Get PDF
    Amphiphilic block copolymers are composed of distinct segments exhibiting different chemical properties. In solution, block copolymers may self-assemble to form micelles when triggered by a change in the environment. The effect of chain rigidity can be investigated in better detail if the molecular weights are controlled, as the polymer’s ability to aggregate is also influenced by polymer size. Acrylate and methacrylate monomers were chosen for their similar chemical properties but their difference in reported glass transition temperature (Tg) 1H-NMR methods were developed to measure molecular weight of poly(methyl methacrylate) and poly(t-butyl acrylate) homopolymers to corroborate size-exclusion chromatography measurements. Using qualitative measurements of peak broadening that occurs by the shortening of T2 relaxation when polymers phase-separate from solution, it was found that polymers with a more rigid hydrophobic region tend to form micelles the most readily
    • …
    corecore